The push door P is a combination of a frame and a door panel.
The frame for a wing door with a flat wall is made of aluminum frame type P
This frame is intended to be integrated into plasterboard or plastered wall
The frame is in natural aluminum.
The frames are cut according to the size of the door panel.
The frames are mitred and fitted with a corner connecting bracket.
The frame is equipped with invisible 3D adjustable hinges for a perfect adjustment of the door panel.
There is a self-adhesive seal for the sound, color aluminum-gray.
The push door can be used for renovation or new constructions.
Since the frame is very stable, the door panel and frame are placed on the finished floor and aligned with the plastered or plasterboard wall.
The installation is very simple and fast.
Thanks to the mounting plates, the frame can be easily attached.
After the frame is installed, the gap between the wall and the frame is foamed with 2-component foam.
After the foam has hardened, this space is plastered out.
The frame is provided for an optimal grip of the plaster on the aluminum.
The free space between the door and the profile is 2 mm horizontally and vertically as standard.
The clearance at the bottom is 4 mm.
This play remains visible after finishing.
The door panel is 40 mm thick as standard,
there are 3 to 5 invisible hinges depending on the door height and weight.
A magnetic lock is integrated in the door panel.
Opening a crank opening without a key is standard,
Opening for a key can be made on request.
A combination consisting of:
Alu frame type P
Door 40 mm
The frame in aluminum type P
cutted at 45 °
Equipped with the cast aluminum corner connection
milled for hinges
Min 3 hidden hinges (max. 5 depending on the door height)
Self-adhesive sound-absorbing seal
Door 40 mm thickness
wood frame massive beech 40 mm x 34
finish: HDF 3mm white primer.
Integrated magnetic lock
The base of the door panel:
honeycomb tubular board
3 point lock
Handle with invisible roses